Dynamic analysis and drilling degrees of freedom

Finite element methods for dynamic analysis employing elements with drilling degrees of freedom are presented. The formulation is based on a variational principle in which displacements and rotations are interpolated independently. The issue of zero masses corresponding to rotational degrees of freedom is addressed and techniques for defining consistent and lumped rotational mass matrices are presented.     

An efficient assumed strain element model with six DOF per node for geometrically non-linear shells

The present paper describes an assumed strain finite element model with six degrees of freedom per node designed for geometrically non-linear shell analysis. An important feature of the present paper is the discussion on the spurious kinematic modes and the assumed strain field in the geometrically non-linear setting. The kinematics of deformation is described by using vector components in contrast to the conventional formulation which requires the use of trigonometric functions of rotational angles. Accordingly, converged solutions can be obtained for load or displacement increments that are much larger than possible with the conventional formulation with rotational angles. In addition, a detailed study of the spurious kinematic modes and the choice of assumed strain field reveals that the same assumed strain field can be used for both geometrically linear and non-linear cases to alleviate element locking while maintaining kinematic stability. It is strongly recommended that the element models, described in the present paper, be used instead of the conventional shell element models that employ rotational angles.     

硫脲型整合树脂在分析上的应用 Ⅰ.岩样中微量银的中子活化分析

前言银和其他贵金属元素一样,在地壳中比较稀少,按其自然丰度为第67号元素,平均含量仅0.07 ppm。由于地质样品成分非常复杂,为测定其微量银,必须进行严格的化学分离。但是迄今文献中报道的许多分离分法,步骤都相当冗长,一般采用氯化银反     

Simulation of water and nitrogen dynamics in soils during wastewater applications by using a finite-element model

A mathematical model was developed to simulate water movement, mass transport, and nitrogen transformations in soils during wastewater applications. The model is one-dimensional and based on the Galerkin finite-element method. The submodel of mass transport of nitrogen incorporates the convection-dispersion processes of ammonium and nitrate nitrogen, nitrification, denitrification, ammonium exchange and uptake of ammonium and nitrate ions. The accuracy and validity of the proposed model was examined by comparison with an explicit-implicit finite-difference model results. The model was used for simulation of water and nitrogen dynamics during wastewater application in homogeneous and multi-layered soils under different N concentration, rate, duration and scheduling of application.     

有限元法应用于微波和光波器件的问题和发展

本文就有限元法应用于微波和光波器件的原理、问题和最新进展作了综合评述。文中讨论了适用于不同问题的变分公式的意义；着重讨论了避免和消除虚模的方法和处理开放边界的技术；还对代表该领域发展趋势的三个方面，即边棱元法。非线性结构及有限元程序的前后处理问题进行了评论和展望。     

卫星编队飞行中的队形设计研究

目前关于卫星编队飞行的研究有显著的增加。多颗从属卫星(从星)在近距离内与主卫星(主星)组成特定的队形以完成相应的任务,是卫星编队飞行的特点及潜在优势。卫星在编队飞行时,其队形定义为以各颗卫星质心为顶点所构成的几何形状,而队形设计则是根据队形的几何形状求出各卫星的轨道根数(其中主星的轨道根数可以根据任务的要求事先确定)。基于相对轨道根数法,根据卫星相对运动方程,提出了“自然队形”的概念及队形设计的一般方法,并给出了具体的例子。     

A numerical model for induction heating processes coupling electromagnetism and thermomechanics

This paper presents a mathematical and numerical model developed for coupling the various physical phenomena (electromagnetic, thermal and mechanical) taking place in axisymmetrical induction heating processes. All three electromagnetic, thermal and mechanical models are time dependent and take full account of the electromagnetic and thermal non‐linear effect especially with magnetic materials. The electromagnetic problem is discretized and solved in the workpiece, air and inductors. The heat transfer equation and the mechanical equilibrium equations are solved in the workpiece only, both using a finite element method. The mechanical model can take into account thermoelastic–plastic behaviour for the part. The model has been successfully applied to several cases of induction heating. Comparisons between numerical and experimental results show an excellent agreement. Copyright © 2003 John Wiley & Sons, Ltd.     

Trace element evaporation during coal gasification based on a thermodynamic equilibrium calculation approach

Thermodynamic equilibrium calculations using the HSC-Chemistry program were performed to determine the distribution and mode of occurrence of potentially toxic and corrosive trace elements in gases from coal gasification processes. The influence of temperature, pressure and gas atmospheres on equilibrium composition was evaluated. In these reducing conditions, the behaviour of the trace elements is complex, but some form of organization can be attempted. Elements were classified into three groups. Group A includes those elements that, according to thermodynamic data at equilibrium, could probably be condensed in coal gasification. Mn is classified in this group. Group B contains those elements that could be totally or partially in gas phase in gas cleaning conditions, and can be divided into two subgroups, depending on whether the cleaning conditions are hot or cold. Co, Be, Sb, As, Cd, Pb, Zn, Ni, V, Cr are elements in this group. Group C contains those elements that could be totally in gas phase in all the possible conditions, including flue gas emissions. Se, Hg and B are the elements that make up this group.     

金属材料中的稀土元素

本文论述了俄罗斯对稀土元素在高强度钢、高温合金、铝合金、镁合金、粉末冶金和磁性材料中的应用及其发展。